Correct Way To Fix An Aluminum Ship

The Correct Way To Fix An Aluminum Ship

The Correct Way To Fix An Aluminum Ship

You can find an array of small-sized boats made using aluminum. The metal parts are commonly utilized in small-sized boat construction due to their durable and lightweight nature. But the aluminum parts can also be influenced due to hard and rough use of the boat. Additionally, the passing of time and environmental elements will have an effect on the aluminum ship.

Some boat owners like to fix the defects by availing the help of a professional services supplier, whereas others prefer to repair their aluminum ship on their own. When you decide to repair the ship, the vessel should be hauled out of the water. You should permit sufficient time for the boat to dry. During the process, you should scrape off sea growth from the area that needs to be repaired.

Establish the damaged area which requires to be fixed and note the coordinates. Now cut an aluminum sheet with tin snips to cover the damaged area. While cutting with the aluminum sheers, you must ensure that the fringe of the patch is overlapping the sides in the hole by at least three inches. You can cut the patch using your hands to bypass the formation of stiffening channels.

Now you have to drill pilot holes around the patch after holding it ready. While drilling the patch, you want to be sure that the patch is found in a proper and even manner. You also need to apply a liberal coat of marine caulk inside the patch. Now place the patch on the hull and insert a pop-rivet into the rivet tool. Use the tool to pull the patch tight.

The same process should be repeated for each of the remaining pilot holes. When you place the patch, allow at least 12 hours to set up the caulk. After 12 hours, utilize a razor knife and slice the caulk from the edges of the patch. You’ve got to permit another 12 hours to set up the caulk, before taking the ship into the water.

Leave a Comment

Your email address will not be published. Required fields are marked *